SWAN MTB-16 (2 IN 1) Manual and Battery Operated Misting Sprayers

10,800.00

Categories: ,

Description

Operation

NOTE: BATTERY MUST BE CHARGED 24 HRS. BEFORE USE

HOW TO USE MANUAL SPRAYER
1.Open the filling cap, put into the water solution tank with the drug in the right dosage. Close the filling hole tightly.
2.Carry a sprayer on the back by holding both belts on your both shoulders.
3.Move the pump lever rhythmically 10-18 times per minute.
4.Point the spray pipe to the part of the plants to be sprayed. Open the faucet until it emit adequate spurt of water to the plants.
5.To stop the spurt of the water, close the faucet by pressing the faucet handle and push the faucet handle lock.

HOW TO USE ELECTRIC SPRAYER
1.To activate the sprayer, simply reach beside with either hand and press the master control button once.
2.At the same time, with the wand pointed in a safe direction, open the hand lever and watch for flow to begin.
3.Once flow has begun in a steady pattern, the pump is primed and ready for use. Simple release the hand lever to stop pump operation.
4.The hand lever features a locking mechanism that allows the handle to be locked in the on position to reduce operator fatigue.
5.To change to the pump speed, simple press the master control button once to advance to the next speed setting.
6.To turn the power off, simply push the master control button to off sign and switch the second button to off. After shutting off the power, always relieve the system pressure for safety, by pointing the wand in a safe direction and squeezing the and lever on the spray wand for several seconds.
7.Then spray to certain direction.