IMIFORCE 200 SC Termiticide – 1 gallon – Non Repellant – Imidaclorid

16,000.00

Category:

Description

 

SAFETY DIRECTIONS

Harmful if swallowed. May irritate the eyes and skin. Repeated exposure may cause allergic disorders. Avoid contact with eyes and skin. When using the product, wear cotton overalls buttoned to the neck and wrist and a washable hat and elbow-length PVC gloves. If clothing becomes contaminated with product or wet with spray, remove clothing immediately. If product or spray on skin, immediately wash area with soap and water. Wash hands after use. After each day’s use, wash gloves and contaminated clothing.

RATE OF APPLICATION

Recommended dilution rate: 5 ml IMIFORCE 200SC per litre of water. Apply IMIFORCE 200SC as a soil treatment to form a complete treated zone between the soil and the structure. Apply to horizontal soil surfaces before concrete is poured by drenching soil evenly at 4 litres solution per m2. Apply vertical treated zones (e.g. against walls extending below soil level) using 5 litres solution per linear meter for each 30 cm depth. Treat at least 1 meter below soil level or down to footing during backfilling or by rodding. Apply to existing building against all walls around the perimeter of the building and around other potential gaps on slab (e.g. around plumbing, electrical, etc.) by following directions for vertical treated zone above or by drilling along all walls (internal and external) within 15 cm. from walls. Drilled holes should be spaced such that a continuous treated zone is formed. Inject 10 litres of solution per linear meter (e.g. 3 litres per hole at 30 cm. spacing).

FOAM APPLICATION

Mix solution of IMIFORCE 200SC with manufacturer’s recommended volume of foaming agent and apply so that the above volume of unfoamed spray per unit area is applied as given above. Correctly applied, IMIFORCE 200SC will prevent termite entry for a period of two years. Regular inspections to detect new termite activity are required after this time. At a mixing rate of 2.5 mL IMIFORCE 200SC per litre of water, semi-annual inspection is required after treatment and retreatment should be done if necessary.

STORAGE AND DISPOSAL

Store in the closed, original container in a cool, well-ventilated area. DO NOT store for prolonged periods in direct sunlight. Triple or preferably pressure rinse containers before disposal. Add rinsings to the spray tank. Do NOT dispose of undiluted chemicals on-site. If recycling replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and deliver empty packaging for appropriate disposal to an approved waste management facility. If an approved waste management facility is not available, bury the empty packaging 500 mm below the surface in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots, in compliance with relevant Local, State or Territory government regulations. DO NOT burn empty containers or product.

Additional information

Weight 4 kg